C2Net Stronghold
Installing your Web Server Certificate
Your certificate will be sent to you
by email. The email message includes the web server certificate that you purchased
in the body of the email message.
Copy the certificate from the body of the email and paste it into a text
editor (such as notepad) to create text files.
- Change directories to /usr/local/stronghold/bin.
- Use the getcert script to install server certificate.
- You will be prompted for your certificate. Copy the text from the email
that you received from GeoTrust in the "Your Web Server Certificate"
section and paste it into the section that getcert provides.
Include ----BEGIN CERTIFICATE---- and ----END CERTIFICATE----. Press (Ctrl-D).
- Use the getca script to install the Root Certificate.
- You will be prompted for the trusted root certificate - "Equifax Secure
Certificate Authority" - below: Copy the following and paste it into the section
that getca provides - Press (Ctrl-D).
-----BEGIN CERTIFICATE----- MIIDIDCCAomgAwIBAgIENd70zzANBgkqhkiG9w0BAQUFADBOMQswCQYDVQQGEwJV
UzEQMA4GA1UEChMHRXF1aWZheDEtMCsGA1UECxMkRXF1aWZheCBTZWN1cmUgQ2Vy dGlmaWNhdGUgQXV0aG9yaXR5MB4XDTk4MDgyMjE2NDE1MVoXDTE4MDgyMjE2NDE1
MVowTjELMAkGA1UEBhMCVVMxEDAOBgNVBAoTB0VxdWlmYXgxLTArBgNVBAsTJEVx dWlmYXggU2VjdXJlIENlcnRpZmljYXRlIEF1dGhvcml0eTCBnzANBgkqhkiG9w0B
AQEFAAOBjQAwgYkCgYEAwV2xWGcIYu6gmi0fCG2RFGiYCh7+2gRvE4RiIcPRfM6f BeC4AfBONOziipUEZKzxa1NfBbPLZ4C/QgKO/t0BCezhABRP/PvwDN1Dulsr4R+A
cJkVV5MW8Q+XarfCaCMczE1ZMKxRHjuvK9buY0V7xdlfUNLjUA86iOe/FP3gx7kC AwEAAaOCAQkwggEFMHAGA1UdHwRpMGcwZaBjoGGkXzBdMQswCQYDVQQGEwJVUzEQ
MA4GA1UEChMHRXF1aWZheDEtMCsGA1UECxMkRXF1aWZheCBTZWN1cmUgQ2VydGlm aWNhdGUgQXV0aG9yaXR5MQ0wCwYDVQQDEwRDUkwxMBoGA1UdEAQTMBGBDzIwMTgw
ODIyMTY0MTUxWjALBgNVHQ8EBAMCAQYwHwYDVR0jBBgwFoAUSOZo+SvSspXXR9gj IBBPM5iQn9QwHQYDVR0OBBYEFEjmaPkr0rKV10fYIyAQTzOYkJ/UMAwGA1UdEwQF
MAMBAf8wGgYJKoZIhvZ9B0EABA0wCxsFVjMuMGMDAgbAMA0GCSqGSIb3DQEBBQUA A4GBAFjOKer89961zgK5F7WF0bnj4JXMJTENAKaSbn+2kmOeUJXRmm/kEd5jhW6Y
7qj/WsjTVbJmcVfewCHrPSqnI0kBBIZCe/zuf6IWUrVnZ9NA2zsmWLIodz2uFHdh 1voqZiegDfqnc1zqcPGUIWVEX/r87yloqaKHee9570+sB3c4
-----END CERTIFICATE-----
Include ----BEGIN CERTIFICATE---- and ----END CERTIFICATE----. Press (Ctrl-D).
- Restart your web server by using the following commands:
stronghold/bin/strongholdctl restart
Or if the server is not running
stronghold/bin/strongholdctl start
Test your certificate by using
a browser to connect to your server. Use the https protocol directive (e.g.
https://your server/) to indicate you wish to use secure HTTP. The padlock icon
on your browser will be displayed in the locked position if your certificates
are installed correctly and the server is properly configured for SSL.